BS EN 10246-7-2005 Non-destructive testing of steel tubes. Automatic full peripheral ultrasonic testing of seamless and welded
|
ID： |
326FC5A88DEE4FCDB0C7CFC83397DC17 |
|
文件大小(MB)： |
0.29 |
|
页数： |
14 |
|
文件格式： |
|
|
日期： |
2010-8-10 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,10246-7:2005,Non-destructive testing,of steel tubes —,Part 7: Automatic full peripheral,ultrasonic testing of seamless and,welded (except submerged arc welded),tubes for the detection of longitudinal,imperfections,The European Standard EN 10246-7:2005 has the status of a,British Standard,ICS 23.040.10; 77.040.20, , , ,BS EN 10246-7:2005,This British Standard was,published under the authority,of the Standards Policy and,Strategy Committee,on 30 December 2005,. BSI 30 December 2005,ISBN 0 580 47386 4,National foreword,This British Standard is the official English language version of,EN 10246-7:2005. It supersedes BS EN 10246-7:1996 which is withdrawn.,The UK participation in its preparation was entrusted by Technical Committee,ISE/73, Steel for pressure purposes, to Subcommittee ISE/73/1, Steel tubes for,pressure purposes, which has the responsibility to:,— aid enquirers to understand the text;,— present to the responsible international/European committee any,enquiries on the interpretation, or proposals for change, and keep UK,interests informed;,— monitor related international and European developments and,promulgate them in the UK.,A list of organizations represented on this subcommittee can be obtained on,request to its secretary.,Cross-references,The British Standards which implement international or European,publications referred to in this document may be found in the BSI Catalogue,under the section entitled “International Standards Correspondence Index”, or,by using the “Search” facility of the BSI Electronic Catalogue or of British,Standards Online.,This publication does not purport to include all the necessary provisions of a,contract. Users are responsible for its correct application.,Compliance with a British Standard does not of itself confer immunity,from legal obligations.,Summary of pages,This document comprises a front cover, an inside front cover, the EN title page,pages 2 to 11 and a back cover.,The BSI copyright notice displayed in this document indicates when the,document was last issued.,Amendments issued since publication,Amd. No. Date Comments,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 10246-7,October 2005,ICS 23.040.10; 77.040.20 Supersedes EN 10246-7:1996,English Version,Non-destructive testing of steel tubes - Part 7: Automatic full,peripheral ultrasonic testing of seamless and welded (except,submerged arc welded) tubes for the detection of longitudinal,imperfections,Essais non destructifs des tubes en acier - Partie 7 :,Contr鬺e automatique par ultrasons sur toute la,circonférence des tubes en acier sans soudure et soudés,(sauf à l'arc immergé sous flux en poudre) pour la détection,des imperfections longitudinales,Zerst鰎ungsfreie Prüfung von Stahlrohren - Teil 7:,Automatische Ultraschallprüfung nahtloser und,geschwei遲er (ausgenommen unterpulvergeschwei遲er),Stahlrohre über den gesamten Rohrumfang zum Nachweis,von L鋘gsfehlern,This European Standard was approved by CEN on 26 August 2005.,CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European,Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national,standards may be obtained on application to the Central Secretariat or to any CEN member.,This European Standard exists in three official versions (English, French, German). A version in any other language made by translation,under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official,versions.,CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.,EUROPEAN COMMITTEE FOR STANDARDIZATION,COMITé EUROPéEN DE NORMALISATION,EUROP腎SCHES KOMITEE FüR NORMUNG,Management Centre: rue de Stassart, 36 B-1050 Brussels,. 2005 CEN All rights of exploitation in any form and by any means reserved,worldwide for CEN national Members.,Ref. No. EN 10246-7:2005: E,EN 10246-7:2005 (E),2,Contents,Foreword ..3,1 Scope.4,2 General requirements ..4,3 Method of test ..4,4 Reference standards.5,4.1 General .5,4.2 Types of reference notches5,4.3 Dimensions of reference notches..6,4.4 Verification .7,5 Equipment calibration and checking7,6 Acceptance.7,7 Test reporting8,Annex A 9,(informative) 9,Parts o……
……